Equipment: 2 MWp DC rooftop PV system. Location: MEA textile mill, grid-connected, self-consumption model. Horizon: 25 years. Evidence date: 2026-09-22. Limitation: Capex, specific yield, O&M % and WACC are bounded model assumptions; verify with bankable yield assessment and EPC tender before commitment.

2 MWp Rooftop PV for Textile Manufacturing in the MEA Region — TCO Use Case

TCO summary
MetricValue
CurrencyUSD
Horizon (years)25
Discount rate8.00 %
Total undiscounted cost (USD)2,048,424.20
Total discounted cost / PV of costs (USD)1,656,859.25
Total undiscounted benefit (USD)6,935,826.46
Total discounted benefit (USD)2,798,461.09
NPV (USD)1,141,601.83
IRR0.1607
Simple payback (year)6.21
Discounted payback (year)8.78
LCOE (USD/kWh)0.0490

Verdict: Base-case 2 MWp textile-rooftop PV in MEA is value-accretive. NPV = USD 1,141,602; discounted payback = 8.78 years; simple payback = 6.21 years; LCOE = USD 0.0490/kWh. The two largest swing factors are capex (EPC tightness) and specific yield (site shading, soiling, transformer distance).

Sector: Textile manufacturing (spinning, weaving, dyeing/finishing). Scope: 2,000 kWp rooftop PV, grid-connected, self-consumption model with optional export. Audience: Plant owners, energy managers, and procurement officers evaluating rooftop solar in MEA.

1. Use-Case Definition

Textile mills in the MEA region typically run multi-shift operations with high thermal and electrical loads — spinning frames, water pumps, dyeing vessels, HVAC for humidification, and compressed air. Daytime electricity demand in humid-climate plants (Egypt, Türkiye-border, Morocco, Pakistan-adjacent) overlaps strongly with solar production, making rooftop PV a credible self-consumption play. A 2 MWp rooftop system is the practical upper bound for many textile mill sheds (≈10,000–14,000 m² of usable roof at 150–200 W/m²).

The objective of this TCO is to answer one procurement question: what is the realistic 25-year levelised cost of electricity (LCOE) from a 2 MWp rooftop PV system on a textile plant in MEA, and which inputs move the answer the most?

2. Inputs Table (model assumptions)

InputValueUnitBasis
Nameplate capacity (DC)2,000kWpProject specification (this use case)
Specific yield, MEA rooftop (range)1,500–1,800kWh/kWp/yrModel assumption; bounded, replace with bankable yield assessment
Performance ratio (inverter + losses)0.82dimensionlessModel assumption (typical commercial rooftop)
Capex (EPC turnkey, rooftop)0.55–0.85USD/WModel assumption, bounded for MEA commercial rooftop tendering
Annual O&M1.0% of capex/yrModel assumption
Opex escalation2.0% per yearModel assumption, consistent with regional CPI bands
Inverter replacement (year 12)0.10USD/W, one-offModel assumption
Module degradation0.5% per year (linear)Model assumption
WACC (real)8.0% per yearModel assumption (illustrative for MEA corporate hurdle rates; replace with your own)
Project life25yearsModel assumption
Avoided grid tariff0.06–0.12USD/kWhModel assumption, illustrative MEA industrial tariff band
Self-consumption share (asset.pv.self_consumption_pct)70%Model assumption, bounded
Tariff escalation (asset.pv.tariff_escalation_pct)1.5% per yearModel assumption, bounded
Export tariff (asset.pv.export_tariff_per_kwh)0.04USD/kWhModel assumption, bounded
Residual value (residual_value.amount)0USDModel assumption (end-of-life scrap treated as zero)
Residual value year (residual_value.year)25yearModel assumption

3. Equipment Reference (real, publicly marketed product families)

The TCO is hardware-agnostic in the financial sense, but a 2 MWp rooftop PV plant is typically delivered with one of the following product families. Confirm exact SKU, datasheet edition, and OEM manual revision at RFQ stage.

4. Year-by-Year Cash Flow

Year-by-year cash flow
YearCost (USD)Benefit (USD)Net (USD)Discount factorDiscounted net (USD)Energy (kWh)
01,400,000.000.0000-1,400,000.001.00-1,400,000.000.0000
114,000.00231,000.00217,000.000.9259200,925.933,300,000.00
214,280.00234,441.90220,161.900.8573188,753.343,283,500.00
314,565.60237,935.08223,369.480.7938177,317.903,267,082.50
414,856.91241,480.32226,623.410.7350166,574.973,250,747.09
515,154.05245,078.37229,924.320.6806156,482.633,234,493.35
615,457.13248,730.04233,272.910.6302147,001.503,218,320.89
715,766.27252,436.12236,669.850.5835138,094.583,202,229.28
816,081.60256,197.42240,115.820.5403129,727.113,186,218.13
916,403.23260,014.76243,611.530.5002121,866.423,170,287.04
1016,731.30263,888.98247,157.680.4632114,481.833,154,435.61
1117,065.92267,820.92250,755.000.4289107,544.523,138,663.43
12217,407.24271,811.4654,404.220.397121,604.663,122,970.11
1317,755.39275,861.45258,106.060.367794,905.063,107,355.26
1418,110.49279,971.78261,861.290.340589,153.573,091,818.49
1518,472.70284,143.36265,670.660.315283,750.473,076,359.39
1618,842.16288,377.10269,534.940.291978,674.683,060,977.60
1719,219.00292,673.92273,454.920.270373,906.373,045,672.71
1819,603.38297,034.76277,431.380.250269,426.933,030,444.35
1919,995.45301,460.58281,465.130.231765,218.873,015,292.12
2020,395.36305,952.34285,556.980.214561,265.743,000,215.66
2120,803.26310,511.03289,707.770.198757,552.112,985,214.58
2221,219.33315,137.64293,918.310.183954,063.482,970,288.51
2321,643.72319,833.19298,189.480.170350,786.232,955,437.07
2422,076.59324,598.71302,522.120.157747,707.542,940,659.88
2522,518.12329,435.23306,917.110.146044,815.392,925,956.58

Payback figures are stated on a consistent basis: simple payback uses undiscounted cost and benefit streams; discounted payback uses discounted cost and benefit streams at 8.0% WACC.

5. Verdict by Scenario

The base case in the COMPUTED TABLES above already blends the capex, yield, self-consumption, tariff escalation and export tariff assumptions listed in §2 into a single computed result (NPV USD 1,141,602; LCOE USD 0.0490/kWh). For directional sensitivity:

Recommended next step: a bankable yield assessment (shading, soiling, transformer distance) and a multi-EPC budget comparison — not a hardware brand shortlist. Confirm exact HS classification, country of origin, certificate of origin, and applicable preferential rate with a licensed customs broker before procurement.

6. Mini Certification & Standards Block

7. HS Code Reference Block (illustrative)

HS code (illustrative)DescriptionDuty rate
8541.43Photovoltaic cells assembled in modules or made up into panelsPENDING — verify with national customs authority
8504.40Static converters (inverters)PENDING — verify with national customs authority
7610.90Aluminium structures (mounting) and partsPENDING — verify with national customs authority

Lookup paths (use the destination country's tariff tool):

Disclaimer: TradVolt does not assert any duty rate as fact. Rates depend on country of origin, country of destination, certificate of origin, and product classification. For trade documentation and freight forwarding, refer to the ICC Incoterms® 2020 rules (https://iccwbo.org/business-solutions/incoterms-rules/incoterms-2020/) and engage a licensed broker for binding rulings.

8. Cross-references for shipping & packaging

9. Call to Action

Request a tailored quote: Open the TradVolt RFQ form.

Frequently Asked Questions

What are the 25-year NPV, IRR, payback, and LCOE for the 2 MWp MEA textile-mill rooftop PV system?

Over a 25-year horizon at an 8.00% real discount rate, the 2 MWp (2,000 kWp) rooftop solar PV installation on an MEA textile manufacturing facility returns a computed NPV of USD 1,141,601.83 (rounded to USD 1,141,602), an IRR of 16.07%, a simple payback of 6.21 years, a discounted payback of 8.78 years, and a 25-year LCOE of USD 0.0490/kWh.

Why do multi-shift textile mills in the MEA region suit high-self-consumption rooftop solar?

Textile plants operating spinning frames, water pumps, dyeing vessels, humidification HVAC, and compressed-air systems across daytime shifts in Egypt, Morocco, Türkiye-border, and Pakistan-adjacent markets have continuous daytime electrical demand that overlaps directly with solar irradiance. On a typical 10,000–14,000 m² mill roof (2,000 kWp at 150–200 W/m²), the model assumes a 70% self-consumption share displacing 0.06–0.12 USD/kWh industrial grid tariffs, with 30% exported at 0.04 USD/kWh.

How do Year-0 capex, annual O&M, and the Year-12 inverter replacement appear in the cash-flow table?

Year-0 turnkey EPC capital cost is computed at USD 1,400,000.00 (within the 0.55–0.85 USD/W bounded MEA commercial rooftop band). Annual O&M starts at USD 14,000.00 in Year 1 (1.0% of capex) and escalates at 2.0% per year to USD 22,518.12 in Year 25. In Year 12, a one-off inverter replacement reserve of 0.10 USD/W (USD 200,000) lifts total Year-12 cost to USD 217,407.24.

Which module, inverter, and mounting product families are referenced for the 2 MWp textile rooftop?

The reference stack cites mono-crystalline TOPCon modules from LONGi (Hi-MO 6 / Hi-MO 7), JinkoSolar (Tiger Neo), or Trina Solar (Vertex N) qualified to IEC 61215, IEC 61730, and UL 61730-1; commercial string inverters from Sungrow (SG125/250HV), Huawei (FusionSolar SUN2000), or Growatt (MAX/MID) certified to IEC 62109-1:2010 and IEC 62109-2:2011; and K2 Systems rooftop mounting rails, alongside IEC 62446-1/-2 commissioning documentation.

Which HS headings and customs lookup rules apply when importing rooftop PV hardware into MEA?

The study lists illustrative 6-digit HS headings 8541.43 for crystalline PV modules, 8504.40 for string inverters (static converters), and 7610.90 for aluminium mounting structures. Because duty rates depend on country of origin, certificate of origin, and preferential trade agreements, all tariff rates are marked PENDING and must be confirmed with the destination national customs authority, alongside ISPM 15 wood-packaging compliance and Incoterms 2020 freight rules.